Details Of The Internal Structure Of The Fiber Optic Splice Clo
-
There are many types of Fiber Optic Splice Closure in the market, and the internal structure is basically unchanged.
The internal structure includes the following sections:
1. Support frame: It is the main body of internal components.
2. Optical cable fixing device: used for fixing the optical cable and the base and fixing the optical cable reinforcing component. The first is the fixing of the cable reinforcement core inside; the second is the fixing of the cable and the support frame; the third is that the cable and the connector box are sealed and fixed by the heat shrinkable jacket.
3. Fiber-optic placement device: The fiber-optic connector and the remaining fiber can be stored in sequence. The length of the remaining fiber should be no less than 1 meter, and the remaining fiber-optic disk should be no less than 35 mm. The storage tray can be four layers, the capacity is large, and the storage tray can be adjusted according to the number of cores connected by the optical cable.
4, fiber optic connector protection: the heat-shrinkable protective sleeve placed on the core holder in the receiving tray can also be used to fix the silicone.
5. Sealing the optical cable and the joint box: sand the joint between the joint box and the optical cable with the abrasive cloth on the cable and the base cable, wipe the sanding place with the cleaning agent, paste the aluminum foil, and place the heat shrinkable tube in the joint box. At the entrance of the cable, the burner is slowly heated according to the middle and rear ends, so that the entire heat-shrinkable tube can be completely contracted.
Share
